Packaged & Skid-Mounted Pump Sets

SPS Series
SPS-10
SPS-25
SPS-55

SKS Series
SKS-10
SKS-30
SKS-50

Request Quote

Package and Skid-Mounted Pump Sets

Simplex Packaged Pump Sets and Skid-Mounted Pump Sets (SPS/SKS Series) are fully integrated systems consisting of pre-engineered, pre-plumbed, and pre-wired pumps, starters, controls, tank monitors, tank level controls, alarm panels and accessories. The SPS Series features a full enclosure and the SKS Series utilizes a skid design. Each set is equipped with a leak detection basin. Field plumbing connection ports are conveniently accessible.

The SPS-10 and SKS-10 Models are designed for relatively simple single pump applications to 17 GPM, 1 HP.

The SPS-25, SPS-55, SKS-30, and SKS-50 Models are designed for relatively large and/or complex single pumps, or progressively complex or large duplex pump applications.

Simplex Packaged Pump Sets are intended for use with fuel oil or lube oil. Do not fill with gasoline. Use with gasoline or use with any flammable liquids at a temperature exceeding the flash point of that liquid presents an immediate explosion and fire hazard. Do not use these pump sets at temperatures exceeding the flash points of their contents.

The SPS Series features a tamper proof enclosure suitable for wall or pad mounting indoors or outdoors (see Option 181). Mechanical and electrical devices are installed in isolated compartments. Its free-standing cabinet design is a space saver. External ports are provided for field plumbing connections. Interior space limitations dictate accessory selection and pump size.

The SKS Series utilizes a traditional open skid design. Plumbing is hard piped. Its great design flexibility can accommodate a wide variety of pumps, motors and accessories. This series is available for indoor installation only.

When requesting a quote, choose the basic components by selecting a SPS/SKS model and indicate additional components from the Options List.

Packaged Pump Sets can be engineered with Simplex Main Storage Tanks, Day Tanks and Fuel Supply Systems.

The design flexibility of the Skid-Mounted Pump Sets (SKS Series) accomodates a wide variety of pumps, motors, and accessories. SKS Series is available for indoor installation only.

Simplex, duplex, triplex, quadplex pumps available

Automatic duplex pump controllers available

“Tank Commander” tank monitors, PLC Control, level controllers, annunciators, fill panels, overfill panels are available as options

SPS-25-SD


FEATURES

System engineered, integrated function packages

TYPE 1 indoor enclosure, primed and painted

TYPE 3R weatherproof enclosure, primed and painted, available

Wall or pad mountable

Segregated electrical/mechanical compartments within enclosure

Enclosure drip pan and leak detector

Pressure relief valve, external port for relief to tank available

Pump disconnect circuit upon leak detection

Inlet, outlet and pressure relief manifolds (SPS Series only)

Fuel connections made to fittings in sidewalls (SPS Series only)

High performance hydraulic gear pumps

Pump shutoffs available

Industrial motors

Motor starter with overload relay and disconnect available

Disconnect switch interlocked with hinged door

SPS-25-SD Mechanical Compartment

STANDARD EQUIPMENT

All base units include standard 2 GPM, 1/3 HP, 115V AC pumps. Add optional pumps and motors as required.

All SPS/SKS Pump Sets include containment sump with leak sensor. Standard SPS sets are Type 1 indoor but can be ordered Type 3R (See Option 181). SKS sets are Type 1 indoor only.

Single Pump Sets

Basic Model
(SPS-10, SPS-25, SPS-55)
- Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Containment sump with leak sensor

Super Model
(SPS-10, SPS-25, SPS-55)
- Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Door mounted disconnect switch with interlock
- Single-phase starter with coil wired to terminal block
- Shut-off valves on inlet and outlet
- Pressure relief valve
- Check valve
- Containment sump with leak sensor

 
Duplex Pump Sets

Basic Model
(SPS-25, SPS-55)
- Duplex, Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Automatic duplex pump controller
- Check valve
- Shut-off valves on inlet and outlet
- Containment sump leak sensor

Super Model
(SPS-25, SPS-55)
- Duplex, Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Automatic duplex pump controller
- Check valve
- Door mounted disconnect switch with interlock
- Single-phase starter
- Shut-off valves on inlet and outlet
- Pressure relief valve
- Containment sump leak sensor

Engineer Specifications Model
(SPS-25, SPS-55)
- Duplex, Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Automatic duplex pump controller
- Check valve
- Door mounted disconnect switch with interlock
- Single-phase starter
- Shut-off valves on inlet and outlet
- Pressure relief valve
- Fuel strainer
- Pressure gauge with isolation hand valve, each pump outlet
- Vacuum gauge with isolation hand valve, each pump inlet
- Loss of flow alarm/lag pump activate
- Containment sump leak sensor

Options List

Consult Simplex for cabinet size when multiple options are required.

 
 

MAXIMUM PUMP AND MOTOR SIZES

SINGLE

DUPLEX

TRIPLEX

QUADPLEX
MODEL

GPM

HP

GPM

HP

GPM

HP

GPM

HP
SPS-10

10

.75

NA

NA

NA
SPS-25

25

1.5

17

1

2

.5

NA
SPS-55

35

5

25

2

7

1

2

.5

  APPLICATION GUIDE
  SPS-10-SS

SPS-10 Series

Single pump to 17 GPM, 1.0 HP. Limited accessories.

SPS-25 Series
Single pump to 25GPM, 1½ HP or duplex pumps to 17 GPM, 1.0 HP. Limited accessories.

SPS-55 Series
Single pump to 35 GPM, 5 HP or complex single or multiple pump sets.

SKS Series
Size and complexity is dependent on available site space. Type 1 indoor installation only.

Specify the Super-XL Pump for applications where the pump starts and stops on demand (ie. automatic tank refilling) and for high pressure applications up to 2500 PSI. Viscosity range is up to 1000 SSU. Do not use this pump for applications that are noise sensitive. For more information click here.



Specify the Series 420 Pump or the Series 500 Pump for continuous duty applications where the pump runs nonstop for extended periods of time, for boiler feed loop applications, for noise sensitive applications, and for many other industrial pump applications. Viscosity range from 32 to 5000 SSU or greater when slower speed motors are used. For more information click here.


SPS-25-SD Duplex Controller

Packaged Pump Sets
Dimensions & Key Features
SPS-10
; SPS-25; SPS-55



Skid-Mounted Pump Sets
Dimensions & Key Features

SKS-10
; SKS-30; SKS-50
 

 
SPS-10 PACKAGED PUMP SET
Dimensions and Key Features
SPS-10 Packaged Pump Set Dimensions and Key Features

1
Pressure Relief Outlet - .75" NPT Male

8
Motor
2 Pump Inlet - .75" NPT Male 9 Pump
3 Pump Outlet - .75" NPT Male 10 Fuel Line Leak Sensor
4 Conduit Entry - .50" NPT 11 Wall Mounting Holes (12) - .0437" x .875" Dia.
5 Vent Louvers 12 Lockable Latch
6 Mounting Holes (6) - .0437" x .875" Dia. 13 Sump Drain Plug

7
Ground Stud    

SPS-25 PACKAGED PUMP SET
Dimensions and Key Features
SPS-25 Packaged Pump Set Dimensions and Key Features
1 Main Disconnect Switch 10 Junction Box
2 Ball Valve (4) - Opt. 087 11 Mounting Holes (6) - .0437" x .875" Dia.
3 Check Valve (2) - Opt. 070 12 Pump Outlet - 1" NPT Male
4 Fuel Line Leak Sensor 13 Pressure Relief Outlet - 1" NPT Male
5 Sump Drain Plug 14 Pump Inlet - 1" NPT Male
6 Pump (2) 15 Wall Mounting Holes (14) - .0437" x .875" Dia.
7 Motor (2) 16 Lockable Latch (2)
8 Drip Pan 17 Conduit Entry - 1.5" & 1" - both sides
9 Fuel Strainer (2) - Opt. 060 18 Vent Louvers - both sides


SPS-55 PACKAGED PUMP SET
Dimensions and Key Features
SPS-55 Packaged Pump Set Dimensions and Key Features
1 Mounting Holes (6) - .0437" x .875" Dia. 11 Pressure Relief Valve - Opt. 095
2 Pump Outlet - 1" NPT Male 12 Pump (2)
3 Pressure Relief Outlet - 1" NPT Male 13 Motor (2)
4 Pump Inlet - 1.5" NPT Male 14 Sump Drain Plug
5 Weatherproof Outer Door - Opt. 181 15 Fuel Line Leak Sensor
6 Wall Mounting Holes (14) - .0437" x .875" Dia. 16 Fuel Strainer (2) - Opt. 060
7 Ball Valve (3) - Opt. 087 17 Drip Pan
8 Check Valve - Opt. 070 18 Vent Louvers - both sides
9 Fuel Strainer - Opt. 060 19 Lockable Latch
10 Junction Box 20 Latch (3)


SKS-10 SKID-MOUNTED PUMP SET
Dimensions and Key Features
SKS-10 Skid-Mounted Pump Set Dimensions and Key Features
1 Mounting Holes (4) - .75" 5 Pump Inlet, Ball Valve - .75" NPT
2 Motor 6 Sump Drain, Both Sides (2) - .50" NPT
3 Pump 7 Fuel Line Leak Sensor
4 Pump Outlet, Ball Valve - .75" NPT    


SKS-30 SKID-MOUNTED PUMP SET
Dimensions and Key Features
SKS-10 Skid-Mounted Pump Set Dimensions and Key Features
1 Mounting Holes (4) - .75" 8 Pump Unit Outlet - 1" NPTM
2 Pressure Relief Outlet - .75" NPT Male 9 Check Valve (2) - Opt. 070
3 Motor (2) 10 Flowswitch (2) - Opt. 285
4 Pump (2) 11 Sump Drain, Both Sides (2) - .50" NPT
5 Ball Valve (4) - Opt. 087 12 Fuel Line Leak Sensor
6 Fuel Strainer (2) - Opt. 060 13 Pump Unit Inlet - 1" NPT
7 Auxiliary Pump Inlet - 1" NPT    


SKS-50 SKID-MOUNTED PUMP SET
Dimensions and Key Features
SKS-50 Skid-Mounted Pump Set Dimensions and Key Features
1 Mounting Holes (4) - .75" 8 Pump Unit Outlet - 2" NPT
2 Pressure Relief Outlet (2) - .75" NPT Male 9 Flowswitch (2) - Opt. 285
3 Motor (2) 10 Check Valve (2) - Opt. 070
4 Pump (2) 11 Sump Drain, Both Sides (2) - .50" NPT
5 Ball Valve (4) - Opt. 087 12 Fuel Line Leak Sensor
6 Fuel Strainer (2) - Opt. 060 13 Main Disconnect Switch - Opt. 260
7 Pump Inlet - 3" NPT    
 

Back to top of page.
 
Back to Fuel Supply Main Page
 

Simplex, Inc., 5300 Rising Moon Road, Springfield, IL 62711-6228
800-637-8603 • 217-483-1600 (24 Hr.) • FAX 217-483-1616