 |
 Simplex, Inc., 5300 Rising Moon Road, Springfield, IL 62711-6228 800-637-8603 • 217-483-1600 (24 Hr.) • FAX 217-483-1616 |
SIMPLEX PACKAGED PUMP SETS (SPS/SKS SERIES) MECHANICAL OPTIONS Other options: Control Devices and Alarms, Level Controllers, Gauges, and Fill Controllers, Duplex Pump Systems, and Pumps and Motors |
|
a) For use with standard 2–5 GPM pumps b) For use with optional 7-25 GPM pumps (options 400-428) c) For use with pumps larger than 25 GPM (options 428-432) |
|
a) 1” NPT b) 1½” NPT c) 2” NPT |
|
a) For use with 2–17 GPM pumps b) For use with option 417; 25 GPM pump and larger |
|
a) ½” NPT, for use with standard 2 GPM pump or option 420, 422: 3, 5 GPM pumps b) ¾” NPT, for use with option 400, 410, 415: 7, 10, 17 GPM pumps c) 1” NPT d) 1¼” NPT, for use with option 417: 25 GPM pump e) 2” NPT |
|
a) ½” NPT b) ¾” NPT c) 1" NPT |
|
a) ½", bronze b) ¾", bronze c) 1", bronze d) 2", bronze e) 3", bronze |
|
a) ½", fire rated b) ¾", fire rated c) 1", fire rated d) 2", fire rated e) 3", fire rated |
|
a) 1½” NPT b) 2" NPT c) 3" NPT |
|
a) For use with standard 2 GPM pump or option 420, 422: 3, 5 GPM pumps b) For use with option 400, 410, 415: 7, 10, 17 GPM pumps c) For use with option 417: 25 GPM pump |
|
a) 1” NPT b) 1½” NPT |
|
a) 2" b) 4" |
|
a) 2" b) 4" |
|
a) SPS-10 b) SPS-25 c) SPS-55 |
|
SIMPLEX PACKAGED PUMP SETS (SPS/SKS SERIES) CONTROL DEVICES AND ALARMS OPTIONS Other options: Mechanical, Level Controllers, Gauges, and Fill Controllers, Duplex Pump Systems, and Pumps and Motors |
|
a) Single pole b) Three pole |
|
Adjustable sensitivity and time delay. (For option 345: Duplex Pump Systems, order two.) |
|
SIMPLEX PACKAGED PUMP SETS (SPS/SKS SERIES) LEVEL CONTROLLERS, GAUGES, AND FILL CONTROLLERS OPTIONS Other options: Mechanical, Control Devices and Alarms, Duplex Pump Systems, and Pumps and Motors |
|
indicator, differential pump control (pump-in or pump-out), low level alarm/contacts, high level alarm/contacts, high level override shut-off, pump h-o-a switch, pump test push-button, power available indicator, pump running indicator. Can be used with duplex pump controller, Option #345. Includes transmitter assembly for installation in remote tank, requires 4" fitting. Specify tank depth |
|
SIMPLEX PACKAGED PUMP SETS (SPS/SKS SERIES) DUPLEX PUMP SYSTEMS OPTIONS Other options: Mechanical, Control Devices and Alarms, Level Controllers, Gauges, and Fill Controllers, and Pumps and Motors |
|
Duplex pump options are used to increase the reliability of a pumping system through the addition of a second, backup pump and level control. In a duplex system, one pump is designated the “lead” pump and the other is the “lag” pump. The lead pump automatically refills the tank over the tank’s normal operating range of 50% to full. Normally, once the tank has been initially filled, the fuel level should never drop below 50%. Less than 50% is indicative of either a failure of the lead pump or consumption in excess of pump capacity. The lag pump and its separate level controller, acting as a backup senses a drop in fuel level below 50% and starts the lag pump, which then continues to run, along with the lead pump, until the tank is full. When ordering, remember that duplex systems include two motor-pumps and therefore require a quantity of two of any option related to the motor or pump, such as valves, strainers, etc. |
|
1) Automatic lead pump alternating with automatic lag pump backup 2) Manual lead pump selection, automatic alternating, automatic lag pump backup 3) Automatic twin pump operation (both pumps run simultaneously) automatic level control backup 4) Manual operation Basic System includes the following: 1) Mode selector switch 2) Pump running indicators for each pump 3) Two 1/3HP, 120V, 2GPM pumps, with check valves |
|
1) Selector switch with positions “pump-1,” “pump-2,” “both” 2) Pump running lights 3) Two 1/3 HP, 120 V, 2 GPM pumps, with check valves |
|
SIMPLEX PACKAGED PUMP SETS (SPS/SKS SERIES) PUMPS AND MOTORS OPTIONS Other options: Mechanical, Control Devices and Alarms, Level Controllers, Gauges, and Fill Controllers, and Duplex Pump Systems Note: The following optional pumps and motors are in lieu of basic unit. The 2 GPM Super-XL pump and the 1/3 HP, 230V AC, single-phase, 60 Hertz motor are the standard pump and motor provided with the basic unit. Pump capacity at 1725 RPM. 50 Hz operation reduces capacity to 83%. |
|
High-tech hydraulic pump featuring pressure-loaded, self-compensating gears and a mechanical shaft seal designed for applications where the pump starts and stops on demand. For more information click here. |
|
High performance cast iron/steel rotor pump for use with heavy fuel or continuous circulation systems where pump runs virtually nonstop. HP is minimum motor size. For more information click here. |
|
High performance cast iron/steel rotor pump for use with heavy fuel or continuous circulation systems where pump runs virtually nonstop. HP is minimum motor size. |
|
3-phase motors may be operated at 190/380V, 50Hz. 50Hz operation reduces pump capacity to 5/6. |
|
Back to top of page. Request Quote. |
|
Simplex, Inc., 5300 Rising Moon Road, Springfield, IL 62711-6228 800-637-8603 • 217-483-1600 (24 Hr.) • FAX 217-483-1616 |