Pump Sets

SPS/SKS
Series
SPS/SKS-10
SPS/SKS-20
SPS/SKS-30
SPS/SKS-50

Request Quote
 

Application Guide

SPS-10 Packaged Pump Set

SPS/SKS-10 Series

Single pump to 17 GPM, 1.0 HP. Limited accessories.

SPS-20 Packaged Pump Set

SPS/SKS-20 Series
Single pump to 25GPM, 1½ HP or duplex pumps to 17 GPM, 1.0 HP. Limited accessories.


 

 

SPS-30 Packaged Pump Set

SPS/SKS-30 Series

Single pump to 36 GPM, 5 HP or duplex pumps to 17 GPM, 2.0 HP. Moderate accessories.

SPS-50 Series
Single or duplex pumps to 36 GPM, 5 HP. Complex accessories.

SKS-30 Skid-Mounted Pump Set

SKS-50 Series
Complex single or multiple pump sets.
 

Specify the Super-XL Pump for applications where the pump starts and stops on demand (ie. automatic tank refilling) and for high pressure applications up to 2500 PSI. Viscosity range is up to 1000 SSU. Do not use this pump for applications that are noise sensitive. For more information click here.

 

 


Specify the Series 420 Pump for continuous duty applications where the pump runs nonstop for extended periods of time, for boiler feed loop applications, for noise sensitive applications, and for many other industrial pump applications. Viscosity range is up to 5000 SSU or greater when slower speed motors are used. For more information click here.

 

 
 

MAXIMUM PUMP AND MOTOR SIZES

SINGLE

DUPLEX

TRIPLEX

QUADPLEX
MODEL

GPM

HP

GPM

HP

GPM

HP

GPM

HP
SPS-10

10

.75

NA

NA

NA
SPS-20

25

1.5

17

1

2

.5

NA
SPS-30

36

5

25

2

7

1

2

.5
SPS-50

36

7.5

36

5

25

3

17

2

 
  STANDARD EQUIPMENT  
  All base units include standard 2 GPM, 1/3 HP, 115V AC pumps. Add optional pumps and motors as required. All SPS/SKS Pump Sets include containment sump with leak sensor. Standard SPS sets are Type 1 indoor but can be ordered Type 3R (See Option 181). SKS sets are Type 1 indoor only.
  Single Pump Sets

Basic Model
(SPS-10, SPS-20, SPS-30, SPS-50)
- Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Containment sump with leak sensor

Super Model
(SPS-10, SPS-20, SPS-30, SPS-50)
- Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Door mounted disconnect switch with interlock
- Single-phase starter with coil wired to terminal block
- Shut-off valves on inlet and outlet
- Pressure relief valve
- Check valve
- Containment sump with leak sensor


SPS-10 and SPS-20 Dimensions and
Key Features Drawings


SPS-30 and SPS-50 Dimensions and
Key Features Drawings


Skid Pump Set Dimensions and
Key Features Drawing


Options

Mechanical
Control Devices and Alarms
Level Controllers, Gauges, and Fill Controllers
Duplex Pump Systems
Pumps and Motors
 
 
Duplex Pump Sets

Basic Model
(SPS-20, SPS-30, SPS-50)
- Duplex, Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Automatic duplex pump controller
- Check valve
- Containment sump with leak sensor

Super Model
(SPS-20, SPS-30, SPS-50)
- Duplex, Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Option 345, automatic duplex pump controller
- Check valve
- Door mounted disconnect switch with interlock
- Single-phase starter
- Shut-off valves on inlet and outlet
- Pressure relief valve
- Containment sump with leak sensor

Engineer Specifications Model
(SPS-30, SPS-50)
- Duplex, Super X-L, 2 GPM, 1/3 HP, 115V AC pump
- Automatic duplex pump controller
- Check valve
- Door mounted disconnect switch with interlock
- Single-phase starter
- Shut-off valves on inlet and outlet
- Pressure relief valve
- Fuel strainer
- Pressure gauge with isolation hand valve, each pump outlet
- Vacuum gauge with isolation hand valve, each pump inlet
- Loss of flow alarm/lag pump activate
- Containment sump with leak sensor



 
  Consult Simplex for cabinet size when multiple options are required.
  Back to top of page.

Back to Pump Sets Page 1.
 
Back to Fuel Supply Main Page
 

Simplex, Inc., 5300 Rising Moon Road, Springfield, IL 62711-6228
800-637-8603, 217-483-1600 (24 Hr.), Fax 217-483-1616