|
Packaged
and Skid
Pump Sets
Quote
Request
|
Packaged Pump Sets Quote Request
Fields
marked with a red asterisk ( * ) are required.
*Name (Last, First):
Title:
*Company:
Address Line 1:
Address Line 2:
City:
State:
Zip Code:
Country (if outside
the US):
*Phone:
Fax:
*Email:
Specifications
Fill in as much information
as possible. Choose the basic components by selecting an SPS/SKS
model and indicate additional components from the Options List.
If Packaged Pump Set (SPS) construction is desired and the optional
components exceed the area available in the cabinet, Simplex
will advise. Skid Pump Sets are available in NEMA-1 indoor construction
only. If additional information is required to complete this
quote Simplex will contact you.
Project Name:
Construction:
SPS
SKS
Model:
SPS/SKS-10
SPS/SKS-20
SPS/SKS-30
SPS/SKS-50
STANDARD EQUIPMENT
LIST
All pump sets
include containment sump with a leak sensor. The standard pump
may be substituted with an optional pump. Standard SPS sets are
Nema-1 indoor but can be ordered Nema-3R (See Option 181). SKS
sets are Nema-1 indoor only.
|
|
Basic-Single Pump
(-BS)
Standard 2GPM, 1/3HP, 115V AC pump
Super-Single Pump
(-SS)
Standard 2GPM, 1/3HP, 115V AC pump
Opt. 260, door mounted disconnect switch with interlock
Opt. 768, single-phase starter with coil wired to terminal
block
Opt. 087, shut-off valves on inlet and outlet
Opt. 095, pressure relief valve
Opt. 070, check valve
Basic-Duplex Pump
(-BD)
Duplex
Standard 2GPM,
1/3HP, 115V AC pump
Opt. 345, automatic duplex pump controller
Opt. 070, check valve |
Super-Duplex Pump
(-SD)
Duplex
Standard 2GPM,
1/3HP, 115V AC pump
Opt. 345, automatic duplex pump controller
Opt. 070, check valve
Opt. 260, door mounted disconnect switch with interlock
Opt. 768, single-phase starters
Opt. 087, shut-offs on inlet and outlet
Opt. 095, pressure relief valve
Engineer Specifications
(-ED)
Duplex
Standard 2GPM,
1/3HP, 115V AC pump
Opt. 345, automatic duplex pump controller
Opt. 070, check valve
Opt. 260, door mounted disconnect switch with interlock
Opt. 768, single-phase starter
Opt. 087, shut-off valves on inlet and outlet
Opt. 095, pressure relief valve
Opt. 060, fuel strainer
Opt. 100, pressure gauge with isolation hand valve, each
pump inlet
Opt. 101, vacuum gauge with isolation hand valve, each
pump inlet
Opt. 285, loss of flow alarm/lag pump activate |
Voltage:
AC
DC
Frequency:
Options
Hold the control
key down while clicking the mouse to select multiple options
and to deselect options.
Mechanical:
Control Devices
and Alarms:
Level Controllers,
Gauges, and Fill Controllers:
Duplex Pump Systems:
Pumps, Transformers
and Motors:
Pump capacity at 1725 RPM. 50 Hz operation reduces capacity to
83%.
HP in pump descriptions is minimum motor size required.
Special
Instructions
ie. quantities, sizes, special paint, code and space requirements,
delivery date, etc.
|